Ironton OHV Horizontal Engine 208cc, 3/4in. 19.05mm x 2 19/64in. 58.5mm Shaft

US$ 149.00 US$ 104.00

Ironton OHV Horizontal Engine 208cc 3/4in. 19.05mm x 2 19/64in. 58.5mm Shaft

  • Model# DJ170F; 208cc engine with 3/4in. dia. x 2 19/64in.L horizontal shaft
  • OHV overhead valve design
  • Electronic ignition featuring recoil start with compression release that helps you start on the first pull
  • Bold circle: 3 5/8in.; Mounting base: 6.4in.L x 3.07in.W
  •  Cast iron cylinder sleeve reduces bore wear to extend engine life and reduces emissions and oil consumption
MPN: 81853288 SKU: 664232 Category:

Ironton OHV Horizontal Engine 208cc, 3/4in. 19.05mm x 2 19/64in. 58.5mm Shaft

Product Summary

This Ironton® OHV Horizontal Engine is an easy-to-install solution for small engine needs. With 208cc and 9 ft.-lbs. Gross Torque/12.5N.m/2,800rpm engine torque, this 500-hour engine provides enough power to run a wide range of equipment, including log splitters and pressure washers. Its design incorporates a cast iron cylinder sleeve and dual ball bearing crankshafts. Low-oil shutdown turns the engine off if it runs low on oil, preventing serious damage or failure. The recoil start has a compression release that helps you get running on the first pull.

Key Specs
Item# 45751
Brand Ironton
Manufacturer’s Warranty 3 months parts / 3 months labor
Ship Weight 37.4 lbs
Engine Displacement 208 cc
Engine Type OHV
Start Type Recoil
Shaft Diameter 3/4 in
Shaft Length 2.29 in
Shaft Diameter Metric 19.05 mm
Shaft Length Metric 58.5 mm
Shaft Output Horizontal
Shaft Keyway 0.19 in
Shaft Rotation (From PTO Shaft Side) Counterclockwise
PTO Height 4.17 in
Cylinders (qty.) 1
Cylinder Bore Cast iron
Cooling System Air cooled
Air Cleaner Type Pleated paper w/foam pre-cleaner
Fuel Tank Capacity 3.38 qt
Oil Capacity 0.5 qt
Low Oil Alert Yes
Lubrication System Splash
Ignition System Electronic
Governor System Mechanical
Carburetor Float/choke
Max. RPM 3,800
Muffler Included Yes
CARB Approval No
Bolt Circle 3.625 in
Mounting Base Length 6.4 in
Mounting Base Width 3.07 in
Dimensions L x W x H (in.) 16.5 x 15 x 14.8 in


There are no reviews yet.

Be the first to review “Ironton OHV Horizontal Engine 208cc, 3/4in. 19.05mm x 2 19/64in. 58.5mm Shaft”

Your email address will not be published. Required fields are marked *